ELEGOO Electronic Fun Kit Bundle with Breadboard, 235 Items for Arduin

ELEGOO Electronic Fun Kit Bundle with Breadboard, 235 Items for Arduino

$9.99 USD

Established in 2011, ELEGOO is a thriving technology company dedicated to open-source hardware research & development, production and marketing.

Our own Quality Management Team will secure the premium quality of our products and we would like to receive your valuable suggestions for our products and make your idea come true.

Package Includes:

1 × Power Supply Module WARNING: Pls. do not use the voltage higher than 9 V;
1 × 400 tie-points Breadboard; 1 × 65 Jumper Wire; 20 × Female-to-Male DuPont Wire
1 × Active Buzzer; 1 × Passive Buzzer; 1 × Precision Potentiometer; 1 × IC 4N35; 1 × IC 74HC595
5 × Diode Rectifier (1N4007); 5 × NPN Transistor (PN2222); 2 × Photoresistor or 1 × Thermistor; 10 × Button (small); 10 × White LED; 10 × Yellow LED; 10 × Blue LED; 10 × Green LED; 10 × Red LED; 1 × RGB LED
2 × Pin header (40pin); 10 × 22 pF Ceramic Capacitor; 10 × 104 Ceramic Capacitor; 5 × Electrolytic Capacitor (10 µF 50 V); 5 × Electrolytic Capacitor (100 µF 50 V)
10 × Resistor (10R); 10 × Resistor (100R); 30 × Resistor (220R); 10 × Resistor (330R); 10 × Resistor (1K); 10 × Resistor (2K); 10 × Resistor (5K1); 10 × Resistor (10K); 10 × Resistor (100K); 10 × Resistor (1M)

74HC595

When a project needs more outputs, the 74HC595 shift register can expand output control while using only a few microcontroller pins. This example is based on the 74HC595. The datasheet refers to the 74HC595 as an "8-bit serial-in, serial or parallel-out shift register with output latches; 3-state." In other words, you can use it to control 8 outputs at a time while only taking up a few pins on your microcontroller. You can link multiple registers together to extend your output even more.

4N35

The 4N35 optocoupler transfers a signal using an internal LED and phototransistor, providing electrical isolation between the input and output sides of a circuit

PN2222 NPN Transistor

Use the PN2222 NPN transistor as a switch to control loads that require more current than a microcontroller I/O pin should supply directly

Electrolytic Capacitor

An electrolytic capacitor is a type of capacitor that uses an electrolyte to achieve a larger capacitance than other capacitor types. An electrolyte is a liquid or gel containing a high concentration of ions. Almost all electrolytic capacitors are polarized, which means that the voltage on the positive terminal must always be greater than the voltage on the negative terminal. The benefit of large capacitance in electrolytic capacitors comes with several drawbacks as well. Among these drawbacks are large leakage currents, value tolerances, equivalent series resistance and a limited lifetime.

Ceramic Capacitor

A ceramic capacitor uses a ceramic material as the dielectric. Ceramics were one of the first materials to be used in the production of capacitors, as it was a known insulator. Ceramic capacitors are usually made with very small capacitance values. Ceramic capacitors are also very small in size and have a low maximum rated voltage. They are not polarized, which means that they may be safely connected to an AC source. Ceramic capacitors have a great frequency response due to low parasitic effects such as resistance or inductance.

1N4007 Diode

A diode is a device which allows current flow through only one direction. That is the current should always flow from the Anode to cathode. The cathode terminal can be identified by using a grey bar as shown in the picture above. For 1N4007 Diode, the maximum current carrying capacity is 1 A it withstand peaks up to 30 A. Hence we can use this in circuits that are designed for less than 1 A. The reverse current is 5 µA which is negligible. The power dissipation of this diode is 3 W. Applications of Diode: ● Can be used to prevent reverse polarity problem ● Half Wave and Full Wave rectifiers ● Used as a protection device ● Current flow regulators

	ELEGOO Electronic Fun Kit 235-Piece	ELEGOO 37-in-1 Sensor Modules Kit	ELEGOO UNO R3 Basic Starter Kit	ELEGOO UNO R3 Super Starter Kit	ELEGOO UNO R3 Most Complete Starter Kit	ELEGOO MEGA 2560 The Most Complete Starter Kit
	Add to Cart	Add to Cart	Add to Cart	Add to Cart	Add to Cart	Add to Cart
Customer Reviews	1,630	2,550	2,080	16,616	3,482	8,010
Price	$9.99$9.99	$36.99$36.99	$21.99$21.99	$38.99$38.99	$59.99$59.99	$65.99$65.99
Controller board	Not Included	Not Included	UNO R3	UNO R3	UNO R3	MEGA 2560
Compatible with Arduino	✓	✓	✓	✓	✓	✓
Projects Tutorial Included	✓	✓	✓	✓	✓	✓
Reasons to Buy	Breadboard circuits, component practice, electronics experiments and reusable prototyping projects	Sensor experiments, motion detection, environmental monitoring and interactive electronics projects	First coding and electronics projects using an included UNO R3 and essential circuit components	Guided projects using sensors, motors, displays and control modules with an included UNO R3	Broad UNO R3 projects combining sensors, displays, motors, RFID, RTC and electronic components	Larger multi-module projects that benefit from more I/O, memory and serial ports with MEGA 2560
Product Type	Electronic Component Kit	Sensor Expansion Kit	Basic Starter Kit	Super Starter Kit	Most Complete Starter Kit	Most Complete Starter Kit
Main Hardware Focus	Breadboard & Discrete Components	Sensors, Displays & Controls	Basic Circuits & I/O	Sensors, Motors & Displays	Sensors, Displays, Motors, RFID & RTC	Sensors, Displays, Motors, RFID & RTC

BUILD BREADBOARD CIRCUITS AND MINI PROJECTS - Create LED indicators, button inputs, traffic-light sequences, light-activated circuits, RGB effects and buzzer alarms for electronics practice, classroom demonstrations and maker projects
235 PARTS FOR REPEATABLE EXPERIMENTS - Includes a 400-tie-point solderless breadboard, power module, jumper wires, Dupont wires, potentiometer, buttons, LEDs, resistors, capacitors, diodes, transistors, buzzers and light-sensitive components
LEARN HOW CORE COMPONENTS WORK - Use the 74HC595 to expand outputs, the 4N35 optocoupler to explore signal isolation, PN2222 transistors to switch loads and 1N4007 diodes for polarity protection and rectification experiments
POWER AND REWIRE PROJECTS QUICKLY - Use the breadboard power module for selectable 3.3 V or 5 V rails, while rigid jumpers and female-to-male leads simplify connections; use a suitable 6.5–9 V DC input and do not exceed 9 V
COMPONENT KIT WITH CLEAR EXPECTATIONS - A controller board, programming cable and wall power adapter are not included; use a compatible microcontroller for coded projects and follow the current tutorial, datasheets and wiring guidance

› See more product details

STEAM Thru Drones ships drones, classroom kits, student resources, accessories, and other educational products within 5–7 business days. Shipping rates are calculated at checkout based on carrier rates and delivery location.

Digital products, including curriculum and licenses, are delivered electronically.
Physical products may arrive in multiple packages depending on the items and order size.
Tracking information will be emailed once your order ships.

For bulk orders or school and district shipping quotes, please contact sales@steamthrudrones.com.

We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.

To start a return, you can contact us at steam@focusingonme.org. If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted. Read More